العربية ภาษาไทย 中国 Deutsch English Español Francais Italiano Pусский Português 日本の
resin solvent, composite solvent, polyester solvent, resin cleaner, polyester cleaner, composite cleaner

 

iBiotec

technical aerosols and products for maintenance

agrochemical solvents for Off-shore and On-shore

will be present at the show

PETROCHYMIA

the 19th and 20th of September 2018

in Martigues (13) France

 

 

 

iBiotec® FAST CLEAN PU 110

 POLYURETHANE CLEANING SOLVENT

RINSING FLUID FOR POLYURETHANE CASTING HEADS

ON LOW PRESSURE MACHINE

AGRO-SOLVENT

 

 

 

 

Alternative solvent to methylene chloride with no modification to machine settings or cycle times.

iBiotec® FAST CLEAN PU 110 is used to rinse RIM compact polyurethanes, type TDI and MDI, including with very short pot life.

iBiotec® FAST CLEAN PU 110 is mainly made up of plant material by-products and materials found naturally in the environment.

iBiotec® FAST CLEAN PU 110 reduces organic vapour emissions to zero.

iBiotec® FAST CLEAN PU 110 is not flammable. Its high flashpoint means that it can be used hot or cold in total safety. 

iBiotec® FAST CLEAN PU 110 contains no substance which is hazardous for health. Its constituent parts are not toxic, carcinogenic, mutagenic, toxic to reproduction, harmful, irritating, sensitising or corrosive.                           

 

 

 

Safety solvents for cleaning polyester, epoxy, polyurethane and composite resins. Substitutes for NMP, NEP, acetone and methylene chloride. Which Safety Solvent to choose? To dissolve composites, polyester matrices, UPR, hybrids, epoxies, polyurethanes, Ibiotec formulator and manufacturer of technical solvents. Resin solvent, composite solvent, polyester solvent, resin cleaner, polyester cleaner, composite cleaner

                                                                                                                                                                

TECHNICAL DATA SHEET

iBiotec® FAST CLEAN PU 110

 

 

1,55 kg  Carbon Equivalent

 No hazard pictogram CLP 1272/2008 1079/2016 

 

 

 

TYPICAL PHYSICAL-CHEMICAL PROPERTIES

 PROPERTIES

  STANDARDS

VALUES

UNITS

Appearance

  Visual

Clear

-

Colour

  Visual

Amber

-

Smell

  Olfactory

Without

-

Density at 25°C

  NF EN ISO 12185

968

kg/m3

Refraction index

  ISO 5661

nm

-

Freezing point

  ISO 3016

-8

°C

Water solubility

  -

partial

%

Kinematic viscosity at 40°C

  NF EN 3104

3.0

mm²/s

Acid index Ia

  EN 14104

<1

mg(KOH)/g

Iodine index

  NF EN 14111

0

gI2/100g

Water content

  NF ISO 6296

<0.1

%

Residue after evaporation

  NF T 30-084

0

%

PERFORMANCE CHARACTERISTICS

PROPERTIES

  STANDARDS

VALUES

UNITS

KB index

  ASTM D 1133

>200

-

Evaporation speed

  -

>6

hours

Surface tension at 20°C

  ISO 6295

32.0

dyne/cm

Copper blade corrosion 100 h at 40°C

  ISO 2160

1a

Measured value

Aniline point

  ISO 2977

nm

°C

FIRE SAFETY CHARACTERISTICS

PROPERTIES

  STANDARDS

VALUES

UNITS

Flashpoint (closed cup)

NF EN 22719

100

°C

Autoignition point

  ASTM E 659

>270

°C

Lower Explosive Limit

  NF EN 1839

non-explosive

% (volume)

Upper Explosive Limit

  NF EN 1839

non-explosive

% (volume)

Explosive, oxidising agent, flammable, highly or extremely flammable substance content

  CLP Regulation

0

%

TOXICOLOGICAL CHARACTERISTICS

PROPERTIES

  STANDARDS

VALUES

UNITS

Anisidine index

  NF ISO 6885

<6

-

Peroxide index

  NF ISO 3960

<10

meq(O2)/kg

TOTOX (anisidine index+2x peroxide index)

  -

<26

-

CMR, irritant and corrosive substance content

  CLP Regulation

0

%

Residual methanol content from transesterification

  GC-MS

0

%

Emissions of hazardous compounds, CMR, irritants, corrosive at 100°C

  GC-MS

Without

%

ENVIRONMENTAL CHARACTERISTICS

PROPERTIES

  STANDARDS

VALUES

UNITS

Water hazard

WGK Germany

1

without hazard for water

class

Primary CEC biodegradability 21 days at 25°C

L 33 T82

>80

%

OECD easy biodegradability 301 A over 28 days

Disappearance of COD

ISO 7827

>80

%

OECD easy and ultimate biodegradability 301 D over 28 days

Biodegradation at 67 days

MITI amended

>90

%

 

MANUAL FOR COMPACT PU REMOVAL MACHINE

Wash cycle after polyurethane casting: 
- Air blast – 10 seconds
- Injection of iBiotec® FAST CLEAN PU 110 for 3/5 seconds
- Air blast – 30 seconds
 (These times are given as an indication; they may vary depending on the nature of the polyurethanes).

The lost casting (referred to as "trash casting") is usually made for several reasons: 
- 1st reason: for the homogeneous mixing of Polyol, isocyanate and (possibly) dyes,
- To prevent air bubbles,
- To eliminate residue in the chamber.

During the wash cycle, the mixing chamber can be positioned above a keg that is equipped with a funnel in order to recover the effluents that can be filtered (6/10 of a mm metallic filter); the mixture can also be decanted over a period of 24 hours.
iBiotec® FAST CLEAN PU 110 can in this way be re-used up to 4 times in a row, depending on the PU.

Compatible with PTFE seals (tests at 20°C, 80°C and 100°C) and silicone seals.
Avoid using with the following kinds of seals: neoprène, Buna, butyl chorobutyl, Viton.

Usage precautions: store in a sheltered location, in a temperate atmosphere.

 

PRESENTATIONS

 

 

 

 

Bidon 20 L

 

 

Safety solvents for cleaning polyester, epoxy, polyurethane and composite resins. Substitutes for NMP, NEP, acetone and methylene chloride. Which Safety Solvent to choose? To dissolve composites, polyester matrices, UPR, hybrids, epoxies, polyurethanes, Ibiotec formulator and manufacturer of technical solvents. Resin solvent, composite solvent, polyester solvent, resin cleaner, polyester cleaner, composite cleaner

 

Drum 200 L

 

 

Safety solvents for cleaning polyester, epoxy, polyurethane and composite resins. Substitutes for NMP, NEP, acetone and methylene chloride. Which Safety Solvent to choose? To dissolve composites, polyester matrices, UPR, hybrids, epoxies, polyurethanes, Ibiotec formulator and manufacturer of technical solvents. Resin solvent, composite solvent, polyester solvent, resin cleaner, polyester cleaner, composite cleaner

 

 GRV 1000 L

 

 

Safety solvents for cleaning polyester, epoxy, polyurethane and composite resins. Substitutes for NMP, NEP, acetone and methylene chloride. Which Safety Solvent to choose? To dissolve composites, polyester matrices, UPR, hybrids, epoxies, polyurethanes, Ibiotec formulator and manufacturer of technical solvents. Resin solvent, composite solvent, polyester solvent, resin cleaner, polyester cleaner, composite cleaner

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Download the data sheet

by clicking on the link below

POLYURETHANE MATRICES.pdf

 

Looking for another product?

Discover our entire range by clicking on the photo

resin solvent, composite solvent, polyester solvent, resin cleaner, polyester cleaner, composite cleaner

 

Manufacturing, lubrification, cleansing, protection,
IBiotec
® Tec Industries® Service
offers a wide range of products reserved for industrial area

 


 If you wish for :

 

a free sample
a technical advice
a product data sheet
a safety data sheet

 

- Please contact us -

 


IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.



IBiotec® Tec Industries®Service is on : YOUTUBE